Premium Non-Fibered Aluminum Coating

AttachmentSize
PDF icon Data Sheet106.2 KB
PDF icon MSDS75.24 KB

PRODUCT DESCRIPTION
LionGuard Premium Non-Fibered Aluminum Coating is an aluminum pigmented asphalt coating designed to protect and extend the life of roof surfaces to which the coating is applied. The coating’s brilliance reflects the intense rays of the sun. This protective coating may be used over smooth or granular modified bitumen membranes, smooth BUR asphalt roofs as well as metal and mobile home roofs. Meets ASTM D-2824 Type I.

ADVANTAGES
» Brilliant reflective silver finish
» Prevents asphalt surfaces from being “cooked” by the sun’s rays
» Prevents rust formation on metal surfaces

INSTALLATION
All surfaces to be coated must be dry, clean and free from oil, grease, debris and loose coating. Roof surfaces should be properly weathered before application can take place. Make all roof repairs prior to application of coating. Apply by brush, roller or using airless spray equipment at the rate of 0.5 to 1 gallon per 100 square feet. Torch-applied smooth modified bitumen membranes should be coated as soon possible after installing and cleaning. Newly installed BUR and hot applied roofs must be allowed to
age 90 to 180 days before coating. Asphalt emulsions may be coated after 5 to 7 days. New metal should be allowed to weather a minimum of three months. Mechanically mix before using and during application. Apply coating in the same direction for more uniform weathering and appearance. Roof surfaces should have positive drainage.

CLEAN UP & STORAGE
Clean tools and equipment with mineral spirits or similar solven